Whether you are looking to draw more air into your engine, in
need of clearance, or
yearning for a cool new look, this
3.75 inch T-Bolt, Thunder Bolt, AFX fiberglass
composite scoop is
just what you've been looking for.
The high quality finish is smooth, strong and ready for prep
and paint. The
surface is Cormat reinforced, insuring it is both strong and straight. A
smooth sandable type gellcoat is used for the finish so its a snap to
prep for paint.
Order
today and get free shipping! This
hood scoops stock number is
Scoop-F4
and weighs approximately
10.00 lbs.
Don't
forget, fiberglass composite scoops are not susceptible to hail damage,
they obviously do not rust and will not ding or dent like steel will.
For more information on this scoop or any other product we carry, call
us Monday thru Thursday 9am until 2pm at 1-352-468-1562.
Do
It Yourself
Installing a scoop yourself - can be a self
satisfying experience, getting you away from
the wrenches for a bit. In addition, if you do it yourself, you'll know
the job was done
right & not tilted or crooked.
The
following is a list of the stuff you'll need to accomplish this task properly:
Fiberglass mat, plastic spreader / squeegee,
1 pint polyester resin w/hardener,
1 pint body filler (polyester based) w/hardener,
40 - 80 & 120 grit sand paper, primer, saber saw or carbon wheel, tape
measure, permanent marker, & safety equipment as recommended on the materials safety guidelines.
*Common sense is also handy! Please remember - fiberglass is
flammable and the dust is toxic.
Quality Steel Hoods Die formed steel construction allows for
use with factory latch and hinge. Side edges fit tight along fender lines just
like your stock hood. Scoops & baffles either come with factory installed rear
grills or door opening.
Tech-Hoods
& Good Hoods Composite
design allows for curves and ram air ports that you just can't produce in steel.
The high tech design of the inner liner provides full support. Some models
feature ducting for ram air applications, others provide max clearance.
Perimeter
Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions. 30% Restocking fee on all returns.
Please See Our Policies
