|
|
|
|
|
1977-78 Headlamp Door
Chrome, Dark Argent |
|
|
 |
|
Price:$18.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
(can fit 1973-76, plastic)
Reproduction bezels to trim the headlamp opening made from the highest
quality materials. No more front end eye sore. Part #GM4144-060-77
Ships FedEx | | |
|
 |
|
|
| 1979-80
Headlamp Door w/ Round Headlamps Chrome Argent |
|
|
|
|
Price:$18.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Reproduction bezels to trim the headlamp opening made from the highest
quality materials. No more front end eye sore. Part #GM4144-060-79
Ships FedEx | | |
|
|
|
|
|
1980 Headlamp Door With
Square Headlamps Chrome |
|
|
|
|
Price:$39.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Reproduction bezels to trim the headlamp opening made from the highest
quality materials. No more front end eye sore. Part #GM4144-060-80
Ships FedEx | | |
|
|
|
|
|
1973-74 Headlamp
Adjusting Nut, box of 50 |
|
|
|
|
Price:$9.95
box |
|
|
Fresh nylon adjusting nuts with clean tabs that stay put. These new
reproduction pieces are here to get you back on the road looking clean
and new again.
Part #GMHWB2104
Ships FedEx | | |
|
|
|
|
|
1975-80 Headlamp
Adjusting Screw, Nut Assembly |
|
|
|
|
Price:$12.95
box |
|
|
(with round headlamps) box of 25
These babies replace your original rusted and cross
threaded screws with clean, new units. Box of 25
Part #GMHWB2108
Ships FedEx | | |
|
|
|
|
|
|
|
1973-80 Front Fender |
|
|
|
|
Price:$169.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
EDP coated, ready
to bolt on reproduction steel fender.... Better, cleaner and straighter
than that bondo bad boy you have on there now! Order today and get
special pricing,
Part #GM4144-100-731
Ships Truck Freight Collect | | |
|
|
|
|
| 1973-80
Lower Rear Fender Patch Panel |
|
|
|
|
Price:$14.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Measures 12" high x 12" wide.
This panel is the
most affordable way to repair the rusty area at the bottom of your
fender, Die formed to original shape. EDP coated and ready to weld on.
Part #GM4144-190-73
Ships FedEx | | |
|
|
|
|
|
1973-80 Inner Fender |
|
|
|
|
Price:$49.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Inner fenders ravaged by
rust and rotted by dripping battery acid? Try a new die stamped steel
inner fender made from automotive grade steel. Part #GM4144-350-73
Ships Truck Freight Collect | | |
|
|
|
|
|
1973-80 Inner Fender
Chrome Finish |
|
|
|
|
Price:$159.95 ea.
|
|
|
On Sale!
Buy one and get one at 20% off when you order a pair.
Inner fenders ravaged by
rust and rotted by dripping battery acid? Try a new die stamped steel
inner fender made from automotive grade steel. Triple
copper, nickel, chrome plated.
Part #GM4144-350-731C
Ships Truck Freight Collect | | |
|
|
|
|
|
|
| 1973-80
Steel 2" Cowl Induction Hood |
|
|
|
|
Price:$499.95 ea.
|
|
|
Brand New EDP coated and
die-stamped steel hood accepts all factory hardware and trim. Get rid of
that old dented, rusted unit and replace it with a brand new reproduction
that will accept the hinges, latch and insulation.
Part #GM4144-200-731
Ships Truck Freight Collect | | |
|
|
|
|
|
1973-80 Hood Pad
Insulation Clips Box of 25 |
|
|
|
|
Price:$5.95 box |
|
|
New hood, New insulation - you definitely need clean, new, plastic
clips. Come in a box of 25. More than enough.
Part #GMHWB2401
Ships FedEx | | |
|
|
|
|
| 1973-80
Hood Adjustment Bumper |
|
|
|
|
Price:$1.95 ea.
|
|
|
New rubber bumper and stud used to adjust the height of the hood in the
front...these usually wear out from age and use. A must for any new hood
installation.
Part #GM4534-205-73
Ships FedEx | | |
|
|
|
|
|
|
|
1973-80 Steel Cowl Induction Hood Scoop
2 1/4" |
|
|
|
|
Price:$179.95 ea.
|
|
|
Steel Cowl Induction Scoop Measures 53-3/4" long x 24" wide x 2-1/4"
high. Now you can fabricate your own steel
cowl induction hood. This steel scoop can be easily trimmed and welded
in place to fit your needs. Unlike ABS plastic & fiberglass this scoop
will stay put.
Part #SCOOP03
Ships FedEx | | |
|
|
|
|
|
1973-80 Steel Pro-Cowl Induction
Hood Scoop 5" |
|
|
|
|
Price:$179.95 ea.
|
|
|
Steel Cowl Induction Scoop
Measures 55-3/8" long x 24-7/8" wide x 5" high.
Now you can fabricate your own steel cowl
induction hood. This steel scoop can be easily trimmed and welded in
place to fit your needs. Unlike ABS plastic & fiberglass this scoop will
stay put.
Part #SCOOP04
Ships FedEx | | |
|
|
|
|
|
1973-80 Pro-Hood Pin Kit |
|
|
|
|
Price:$34.95 ea.
|
|
|
Complete Pro-Hood Pin Kit (30 pieces, Includes bezels, plates, gaskets,
pins, cables, and all hardware to install) Originally designed as
replacement for '70 Chevelle S.S.
Part #4033-222-70S
Ships FedEx | | |
|
|
|
|
|
|
|
1973-80 Battery Tray (LH
or RH) |
|
|
|
|
Price:$12.95 ea.
|
|
|
Battery Acid eat your tray? Well, them its time for a New die-stamped
battery tray with EDP coating for added rust protection.
Part #GM4144-300-73
Ships FedEx | | |
|
|
|
|
|
1973-80 Battery Tray
Hold-Down Clamp and Bolt Set |
|
|
|
|
Price:$5.95
set |
|
|
Fresh new corrosion free hardware, black EDP coated and ready for that
new battery installation. Steel retaining clamp made from automotive
grade steel. Set complete with bolt.
Part #GM4031-301-66S
Ships FedEx | | |
|
|
|
|
| 1973-80
Battery Tray Support, RH standard only |
|
|
|
|
Price:$17.95 ea.
|
|
|
This die-stamped EDP
coated panel that repair common rust out areas on the truck. The panel
fits excellent and gives plenty of coverage for rust repair.
Part #GM4144-303-731
Ships FedEx | | |
|
|
|
|
|
1973-80 Battery Tray
Support, LH auxiliary only |
|
|
|
|
Price:$29.95 ea.
|
|
|
This is a direct bolt on tray assembly with full EDP coating. Installed
with new stainless steel hardware this unit will help to detail your
engine compartment.
Part #GM4144-303-732
Ships FedEx | | |
|
|
|
|
|
|
| 1973-80
Radiator Support |
|
|
|
|
Price:$179.95 ea.
|
|
|
This stamped steel
radiator support replaces your rusty OEM one perfectly. No more
unsightly under hood view of the one ravaged by rust and rotted by
dripping battery acid. Factory type black EDP coating.
Part #GM4144-320-73
Ships Truck Freight Collect | | |
|
|
|
|
|
1973-80 Radiator Mounting
Pad With small-block V8 |
|
|
|
|
Price:$24.95
set |
|
|
(set of 4, 3-core radiators)
When swapping out your radiator you'll need a fresh set of rubbers to
hold the core firmly in place. These mounts are made with OEM density
rubber and have the nipple spots preformed in.
Part #GM4012-326-681S
Ships FedEx | | |
|
|
|
|
|
1973-80 Radiator Mounting
Pad With big-block V8 |
|
|
|
|
Price:$24.95
set |
|
|
(set of 4, 4-core radiators)
When swapping out your radiator you'll need a fresh set of rubbers to
hold the core firmly in place. These mounts are made with OEM density
rubber and have the nipple spots preformed in.
Part #GM4012-326-682S
Ships FedEx | | |
|
|
