On-Sale!
This GT-500
Tech-Hood not only has 2 big ram air ports up front, it's rear cowl area
can be opened for cool air to pass in and out of the engine
compartment. The show worthy inner liner is smooth, strong and ready for
prep and paint. High
strength fiberglass composite construction.
This
Cobra R Tech-Hood easily installs to factory hood hinges. The big scoop
provides plenty of extra
clearance and the cool new look you've been yearning for.
High strength fiberglass composite construction.
The show worthy inner liner is smooth, strong and ready for prep and
paint.
This Ram Air
II Tech-Hood has 2 high volume ram air ports up front. It's rear cowl
area can be opened for additional cooling. The smooth inner insulates the
outer surface from engine heat and is ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
This Deep Throat Tech-Hoods high volume ram air port
actually dips below the hood surface for an extremely aggressive look. It's rear cowl
area can be opened cooling. The smooth inner is ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
This
Dominator Performance Truck hood says Back Off! The big scoop provides
extra clearance and a cool new look. Full perimeter inner frame which utilizes OEM hinge
& latch, 90 degree edges on both sides help to maintain fender contours, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface, High performance light weight design.
This
Good Hood says More Power! Big exhaust scoops for curb appeal.
Made of high strength fiberglass composite
construction. Steel reinforcement is added for durability.
The show worthy inner liner is smooth, strong and ready for prep and paint.
Easily installs to factory hood hinges with no
modifications required.
Part # GHF-101
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for use with
factory latch and hinge. Side edges
fit tight along fender lines just
like your stock hood. Scoops &
baffles either come with factory
installed rear grills or door opening.
Tech-Hoods
& Good Hoods Composite design allows for curves
and ram air ports that you just can't produce in steel. The
high tech design of the inner liner provides full
support. Some models feature ducting for ram air applications, others provide
max clearance.
Perimeter Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
You
can order on-line anytime 24/7, or Call our order-tech line Monday-Thursday
9am-2pm at 1-352-468-1562.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions.
See Policies
