This Dual
Ram Air Tech-Hoods high volume ram air port
actually dips below the hood surface for an extremely aggressive look. It's rear cowl
area can be opened for cooling. The smooth inner is ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
On-Sale!
This Ram Air
II Tech-Hood not only has 2 big ram air ports up front, it's rear cowl
area can be opened for cool air to pass in and out of the engine
compartment. The show worthy inner liner is smooth, strong and ready for
prep and paint. High
strength fiberglass composite construction.
This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a stock inner frame that allows it to bolt up
using all existing hardware for quick easy installation. Cool air passes
in and out of the engine compartment by way of an air-passage screen on
the rear of the hood. The black EDP coating prevents rust.
This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a stock inner frame that allows it to bolt up
using all existing hardware for quick easy installation. Cool air passes
in and out of the engine compartment by way of an air-passage screen on
the rear of the hood. The black EDP coating prevents rust.
Whether you are looking to draw more
air into your engine, in need of clearance, or yearning for a cool new
look, this Good Hood is just what you've been looking for. An optional
dyno-proven functional ram air upgrade is available. The show
worthy inner liner is smooth and ready for prep and paint.
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for use with
factory latch and hinge. Side edges
fit tight along fender lines just
like your stock hood. Scoops &
baffles either come with factory
installed rear grills or door opening.
Tech-Hoods
& Good Hoods Composite design allows for curves
and ram air ports that you just can't produce in steel. The
high tech design of the inner liner provides full
support. Some models feature ducting for ram air applications, others provide
max clearance.
Perimeter Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
You
can order on-line anytime 24/7, or Call our order-tech line Monday-Thursday
9am-2pm at 1-352-468-1562.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions.
See Policies
