Home |  About Us |  FAQ's |  Policies And Information |  Shipping Rates |  Rebate |  Contact Us |  View Cart

All hoods ship from the manufacturer freight collect. For approximate charges to your area please view shipping rate chart.

93-98 Jeep Grand Cherokee Deep Throat STS Hood 'Fiberglass Perimeter Style'

 On-Sale! This  Deep Throat Performance Truck Hoods high volume ram air port actually dips below the hood surface for an extremely aggressive look. Full perimeter inner frame which utilizes OEM hinge & latch, 90 degree edges on both sides help to maintain fender contours, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface, High performance light weight design.  

 

Part # FFCH-93DT

93-98 Jeep Grand Cherokee Max Ram Air Hood 'Fiberglass Perimeter Style'

 This  Max Ram Air Performance Truck Hood has a high volume ram air port up front. It's air box can be opened for ram air capabilities. The smooth inner insulates the outer surface from engine heat and is  ready for prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.  

 

Part # FFCH-93MR

93-98 Jeep Cherokee Grand Dominator Hood, Composite-Tech

 This Cowl Induction Tech-Hood hood easily installs to factory hood hinges. The big scoop provides plenty of extra clearance and the cool new look you've been yearning for. High strength fiberglass composite construction. The show worthy inner liner is smooth, strong and ready for prep and paint.  

 

Part # TFCH-4

Hood Scoops and Accessories  

Design and build your own custom hoods. Steel and fiberglass scoops are now available in a variety of styles. Reproduction 70's style pin kits have also just arrived, 30 piece kit w/ gaskets and trim.

Instant order verification
Best selection anywhere
Industry leader since 1987

Current Hood Specials

 SteelHoods - Heavily discounted.

Shipping Deals

 SteelHoods - 48 States Bus. $59.27

 Tech-Hoods - 65% off FedEx Freight
 Peri. Hoods - 65% off FedEx Freight

Above applies to most, not all hoods

 

Customer photo gallery

 Quality Steel Hoods
 
Die formed steel construction allows for use with factory latch and hinge. Side edges fit tight along fender lines just like your stock hood. Scoops & baffles either come with factory installed rear grills or door opening.

 Amazing Tech-Hoods
 
Composite design allows for curves and ram air ports that you just can't produce in steel. The high tech design of the inner liner provides full support. Some models feature ducting for ram air applications, others provide max clearance.

 Perimeter Style Hoods
Designed for both performance and durability. These hoods feature a smooth gellcoated, easy to sand top surface. The underside features a light-weight perimeter inner structure allowing for full clearance and has a fiberglass textured black lacquer finish.


 Copyright 1987-date Carhoods.com, USBodySource.com. Hard to navigate? Best if viewed in Microsoft Explorer Copyright. The use of names and headings is for the sole purpose of identification. This site, Carhoods.com, E-BodyParts.com, USBodySource.com etc. are not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial purposes without express written permission from US Body Source inc. 8823 Van Fleet Road Riverview Florida 33578 . All products listed herein are distributed F.O.B. from facilities located in the USA.  Please Note: Freight charges are nonrefundable, no exceptions. Refused shipments will be charged freight in both directions. 30% Restocking fee on all returns. Please See Our Policies