All hoods ship from the manufacturer freight collect. For approximate charges to your area please view shipping rate chart.

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Stock Hood 'Fiberglass Perimeter Style'  This composite reproduction stock design hood features: 90 degree edges on both sides to help maintain fender contours, High performance light weight design, Full perimeter inner frame utilizes OEM hinge & latch, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.     Part # FCGH-9

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Ram Air II Hood, Composite-Tech  On-Sale! This  Ram Air II Tech-Hood not only has 2 big ram air ports up front, it's rear cowl area can be opened for cool air to pass in and out of the engine compartment. The show worthy inner liner is smooth, strong and ready for prep and paint. High strength fiberglass composite construction.     Part # TCGH-84

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Super Sport Hood, Composite-Tech  This Super Sport Tech-Hood features high strength fiberglass composite construction and has a big ram air port up front, it's rear cowl area can be opened  for cool air to pass in and out of the engine compartment. The show worthy inner liner is smooth, strong and ready for prep and paint.     Part # TCGH-83

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Cowl 3.5" Hood, Composite-Tech  This Cowl Induction Tech-Hood easily installs to factory hood hinges. The big scoop provides plenty of extra clearance and the cool new look you've been yearning for. High strength fiberglass composite construction. The show worthy inner liner is smooth, strong and ready for prep and paint.     Part # TCGH-81

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Step-Down Hood 'Fiberglass Perimeter Style'  This performance truck Step-Down Hood features: Full partial inner frame which utilizes OEM hinge, 90 degree edges on both sides help to maintain fender contours, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface, High performance light weight design.     Part # FCGH-11

81-87 Chevy GMC Truck / 81-91 Blazer Suburban Crew Cab Cowl Hood Steel    Lowest Price Ever!      Due to huge manufacturer overstock.     Hurry wholesale pricing is only valid while supplies last.   This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a  stock inner frame that allows it to bolt up using all existing hardware for quick easy installation. Cool air passes in and out of the engine compartment by way of an air-passage screen on the rear of the hood. The black  EDP coating prevents rust.     Part # 4145-200-811

81-87 Chevrolet Truck Fiberglass Tilt Front End 2 Light Model On-line price $1899.00  Quick / Full engine access has never been so easy! Manufactured as a one piece unit with a smooth gellcoated finish. The interior is textured black lacquer. This unit accepts the o.e.m. grill and headlights providing you with a functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾". This unit comes with basic installation hardware - click photo for installation tips.    Part # FCGI-1

81-87 Chevrolet Truck Fiberglass Cowl Induction 4" Tilt Front End On-line price $1899.00  Quick / Full engine access has never been so easy! Manufactured as a one piece unit with a smooth gellcoated finish. The interior is textured black lacquer. This unit accepts the o.e.m. grill and headlights providing you with a functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾". This unit comes with basic installation hardware - click photo for installation tips.    Part # FCGI-81C

73-80 Chevy GMC Truck Stock Hood 'Fiberglass Perimeter Style'  This composite reproduction stock design hood features: 90 degree edges on both sides to help maintain fender contours, High performance light weight design, Full perimeter inner frame utilizes OEM hinge & latch, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.     Part # FCGH-4

73-80 Chevy GMC Truck Cowl 3.5" Hood, Composite-Tech  This Cowl Induction Tech-Hood easily installs to factory hood hinges. The big scoop provides plenty of extra clearance and the cool new look you've been yearning for. High strength fiberglass composite construction. The show worthy inner liner is smooth, strong and ready for prep and paint.     Part # TCGH-73

73-80 Chevy GMC Truck Super Sport Hood, Composite-Tech  On-Sale! This Super Sport Tech-Hood features high strength fiberglass composite construction and has a big ram air port up front, it's rear cowl area can be opened  for cool air to pass in and out of the engine compartment. The show worthy inner liner is smooth, strong and ready for prep and paint.     Part # TCGH-74

73-80 Chevy GMC Truck Cowl Hood Steel    Lowest Price Ever!      Due to huge manufacturer overstock.     Hurry wholesale pricing is only valid while supplies last.   This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a  stock inner frame that allows it to bolt up using all existing hardware for quick easy installation. Cool air passes in and out of the engine compartment by way of an air-passage screen on the rear of the hood. The black  EDP coating prevents rust.   Part # 4144-200-731

73-80 Chevrolet Truck Fiberglass Tilt Front End On-line price $1899.00  Quick / Full engine access has never been so easy! Manufactured as a one piece unit with a smooth gellcoated finish. The interior is textured black lacquer. This unit accepts the o.e.m. grill and headlights providing you with a functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾". This unit comes with basic installation hardware - click photo for installation tips.    Part # FCGI-01

73-80 Chevrolet Truck Fiberglass Cowl Induction 2" Tilt Front End On-line price $1899.00  Quick / Full engine access has never been so easy! Manufactured as a one piece unit with a smooth gellcoated finish. The interior is textured black lacquer. This unit accepts the o.e.m. grill and headlights providing you with a functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾". This unit comes with basic installation hardware - click photo for installation tips.    Part # FCGI-73C

73-87 Chevrolet Truck Fiberglass Cab On-line price $6599.00  Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered with black lacquer finish.   The unit arrives bare without dash, doors or any mechanical or electrical devices. Headliner is supplied but comes separately and requires professional installation.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.           All safety concerns must be taken up with the chassis shop involved with the project.    Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........ We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.     Part # FCGA-80

76-91 Chevrolet Truck Fiberglass Blazer Body Tub On-line price $8499.00  Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered with black lacquer finish.   The unit arrives bare without dash, doors or any mechanical or electrical devices. Headliner is supplied but comes separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the collecting water.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.           All safety concerns must be taken up with the chassis shop involved with the project.    Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........ We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.     Part # FBJA-80

73-75 Chevrolet Truck Fiberglass Blazer Body Tub On-line price $8399.00  Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered with black lacquer finish.   The unit arrives bare without dash, doors or any mechanical or electrical devices. Headliner is supplied but comes separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the collecting water.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.     Part # FBJA-80R

73-91 Chevrolet Truck Fiberglass Blazer Front Floor Pans 1/2 - Pair On-line price $229.00  Easy patch over. Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full inner flange for easy installation. Jam holes and attaching points must be opened for installation.     Part # FBJL-7

73-87 Chevrolet Truck Fiberglass Doors - Pair On-line price $898.00  Smooth gray gellcoat finish both inside and out. Accepts original hinge, latch & regulator hardware. Double wall posts support upper window and track. Windows come blanked in and must be opened during installation. Coremat® reinforced outer skin reduces "print thru". Original felts can be epoxied in the door post and side track. Door is supplied bare with no glass, mechanism, tracks or hardware.    Part # FCGD-80

73-80 Chevrolet Truck Fiberglass Front Wheel Wells - Pair On-line price $298.00  Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full inner flange for easy installation. Jam holes and attaching points must be opened for installation. smooth roll into engine compartment. No other reproduction fiberglass wheel wells come so complete. Sold in pairs only.    Part # FCGW-1

81-87 Chevrolet Truck Fiberglass Front Wheel Wells - Pair On-line price $298.00  Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full inner flange for easy installation. Jam holes and attaching points must be opened for installation. smooth roll into engine compartment. No other reproduction fiberglass wheel wells come so complete. Sold in pairs only.    Part # FCGW-2

73-87 Chevrolet Truck Fiberglass Step Fenders With Step Short Wheel Base - Pair On-line price $798.00  Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full rear flange for easy installation, step attached for one piece custom look. marker hole and attaching points must be opened for installation. No other reproduction fiberglass fenders come so complete. Sold in pairs only.   Part # FCGF-87

73-87 Chevrolet Truck Fiberglass Fleetside Bedsides 8' - Pair On-line price $1098.00  8 foot box side. Outer skin only for custom application. Full taillight area and front jam. No internal attach points. Wheel openings feature a smooth 90° roll which extends in a full ¾". Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. No other reproduction fiberglass bedsides come so complete. Sold in pairs only.     Part # FCGQ-73

73-87 Chevrolet Truck Fiberglass Fleetside Bedsides 6' - Pair On-line price $1098.00  6 foot box side. Outer skin only for custom application. Full taillight area and front jam. No internal attach points. Wheel openings feature a smooth 90° roll which extends in a full ¾". Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. No other reproduction fiberglass bedsides come so complete. Sold in pairs only.    Part # FCGQ-87

73-87 Chevrolet Truck Fiberglass Fleetside Bed 8' On-line price $4999.00  8 Foot bed comes complete with bedsides attached - as one piece.  Ideal for customized or frenched in taillight applications. Box section side walls, with a smooth grey gellcoat inner and outer finish. Hollow sealed stake pocket can be opened if desired for original appearance.  Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed. Gellcoated Fiberglass floors have a ribbed design - eliminated the need for a Wood kit. Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back splash. Installation time (after removal of original box ) 1-2 hours.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers. It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical)  Please Note: We are unable to ship Fleetside Beds. They must be picked up in person to avoid freight damage.     Part # FCGB-73

73-87 Chevrolet Truck Fiberglass Fleetside Bed 6' On-line price $4999.00  Bed comes complete with bedsides attached - as one piece.  Ideal for customized or frenched in taillight applications. Box section side walls, with a smooth grey gellcoat inner and outer finish. Hollow sealed stake pocket can be opened if desired for original appearance.  Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed. Gellcoated Fiberglass floors have a ribbed design - eliminated the need for a Wood kit. Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back splash. Installation time (after removal of original box ) 1-2 hours.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers. It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical)  Please Note: We are unable to ship Fleetside Beds. They must be picked up in person to avoid freight damage.     Part # FCGB-87

73-87 Chevrolet Truck Fiberglass Stepside Bed 6' With Fender On-line price $3999.00  Bed Comes complete with fenders & steps attached - as one piece.  Ideal for customized or frenched in taillight applications. Double panel side walls, with a smooth gray gellcoat inner and outer finish. Hollow sealed stake pocket - can be opened if desired for original appearance. Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed.  Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed Wood Kits. Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back splash. Side flange is angled and does not have the curled design of the original bed (Due to compound curve & fiberglass mold limitations.)  - Installation time (after removal of original box ) 1-2 hours.   Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers.  It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical)     Part # FCGB-73S

73-87 Chevrolet Truck Fiberglass Stepside Bed 6' With Fender Tubbed On-line price $3999.00  Bed Comes complete with fenders & steps attached - as one piece.  Ideal for customized or frenched in taillight applications. Double panel side walls, with a smooth gray gellcoat inner and outer finish. Hollow sealed stake pocket - can be opened if desired for original appearance. Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed.  Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed Wood Kits. Black lacquer over fiberglass texture underneath the bed floor and on the forward side of the back splash.  Tubbed bed allows for 21" clearance from tub to wheel opening flange. This allows for 20"-21" tires. The distance between the tubs is 33". Side flange is angled and does not have the curled design of the original bed (Due to compound curve & fiberglass mold limitations.)  - Installation time (after removal of original box ) 1-2 hours.   Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  To install - simply drill thru the bed and the under floor reinforcements and thru bolt it in place with O.D washers.  It may be necessary to drill a new mounting hole through the existing frame.  Drilling - sanding and possible notching of under floor braces may be required for correct installation of your NEW and IMPROVED, RUST FREE, DENT FREE  bed assembly.  (Ground wire required for electrical)    Part # FCGB-732

Hood Scoops and Accessories   Design and build your own custom hoods. Steel and fiberglass scoops are now available in a variety of styles. Reproduction 70's style pin kits have also just arrived, 30 piece kit w/ gaskets and trim.