This composite reproduction stock design hood features: 90 degree edges on both sides to help maintain fender contours, High performance light weight design, Full perimeter inner frame utilizes OEM hinge & latch, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.
On-Sale!
This Ram Air
II Tech-Hood not only has 2 big ram air ports up front, it's rear cowl
area can be opened for cool air to pass in and out of the engine
compartment. The show worthy inner liner is smooth, strong and ready for
prep and paint. High
strength fiberglass composite construction.
This Super
Sport Tech-Hood features
high strength fiberglass composite construction and has a
big ram air port up front, it's rear cowl area can be opened for
cool air to pass in and out of the engine compartment. The show worthy
inner liner is smooth, strong and ready for prep and paint.
On-Sale!
This
Cowl Induction Tech-Hood easily installs to factory hood hinges.
The big scoop provides plenty of extra
clearance and the cool new look you've been yearning for.
High strength fiberglass composite construction.
The show worthy inner liner is smooth, strong and ready for prep and
paint.
This performance truck Step-Down Hood features: Full partial inner frame which utilizes OEM hinge, 90 degree edges on both sides help to maintain fender contours, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface, High performance light weight design.
Lowest
Price Ever! Due to huge manufacturer overstock.
Hurry wholesale pricing is only
valid while supplies last.
This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a stock inner frame that allows it to bolt up
using all existing hardware for quick easy installation. Cool air passes
in and out of the engine compartment by way of an air-passage screen on
the rear of the hood. The black EDP coating prevents rust.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. grill and headlights providing you with a functional new one piece
look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit comes with basic installation hardware - click photo for
installation tips.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. grill and headlights providing you with a functional new one piece
look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit comes with basic installation hardware - click photo for
installation tips.
This composite reproduction stock design hood features: 90 degree edges on both sides to help maintain fender contours, High performance light weight design, Full perimeter inner frame utilizes OEM hinge & latch, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.
On-Sale!
This Super
Sport Tech-Hood features
high strength fiberglass composite construction and has a
big ram air port up front, it's rear cowl area can be opened for
cool air to pass in and out of the engine compartment. The show worthy
inner liner is smooth, strong and ready for prep and paint.
This
Cowl Induction Tech-Hood easily installs to factory hood hinges.
The big scoop provides plenty of extra
clearance and the cool new look you've been yearning for.
High strength fiberglass composite construction.
The show worthy inner liner is smooth, strong and ready for prep and
paint.
Lowest
Price Ever! Due to huge manufacturer overstock.
Hurry wholesale pricing is only
valid while supplies last.
This Quality 2 in. steel cowl hood is GM
certified and has a stock inner frame that allows it to bolt up using
all existing hardware for quick easy installation. Cool air passes in and out
of the engine compartment by way of an air-passage screen on the rear of the
hood. The black EDP coating prevents rust.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. grill and headlights providing you with a functional new one piece
look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit comes with basic installation hardware - click photo for
installation tips.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. grill and headlights providing you with a functional new one piece
look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit comes with basic installation hardware - click photo for
installation tips.
Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary
strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass
and covered with black lacquer finish.
The unit arrives bare without dash, doors or any
mechanical or electrical devices. Headliner is supplied but comes
separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to
drain the collecting water. Note:
Factory installed floor braces may need
to be trimmed or removed for desired fit.
Cabs - although strong, straight, rust free &
reliable - are not the project for the average "Joe". They are intended
for the serious "Ground Up Builder" who has the time, money & experience to
do the job correctly.
All safety concerns must be taken up with the
chassis shop involved with the project.
Once finished these cabs look exceptional and should just about last forever,
however, sit down and Please give some serious thought before ordering........ We prefer
that our customers be confident & educated in the amount of work required to complete
this project and secure in the choice that you make.
Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary
strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass
and covered with black lacquer finish.
The unit arrives bare without dash, doors or any
mechanical or electrical devices. Headliner is supplied but comes
separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to
drain the collecting water. Note:
Factory installed floor braces may need
to be trimmed or removed for desired fit.
Cabs - although strong, straight, rust free &
reliable - are not the project for the average "Joe". They are intended
for the serious "Ground Up Builder" who has the time, money & experience to
do the job correctly.
Easy patch over. Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner
finish. Full inner flange for easy installation. Jam holes and attaching
points must be opened for installation.
Smooth
gray gellcoat finish both inside and out. Accepts original hinge, latch & regulator hardware. Double wall posts support upper window and track. Windows come blanked in and must be opened during installation. Coremat® reinforced outer skin reduces "print thru". Original felts can be epoxied in the door post and side track. Door is supplied bare with no glass, mechanism, tracks or hardware.
On Sale !
This Ram Air
II Tech-Hood not only has 2 big ram air ports up front, it's rear cowl
area can be opened for cool air to pass in and out of the engine
compartment. The show worthy inner liner is smooth, strong and ready for
prep and paint. High
strength fiberglass composite construction.
NEW!
This Super Sport Tech-Hood features high strength fiberglass
composite construction and has a big ram air port up front, it's rear cowl
area can be opened for cool air to pass in and out of the engine compartment.
The show worthy inner liner is smooth, strong and ready for prep and paint.
This
Cowl Induction Tech-Hood easily installs to factory hood hinges.
The big scoop provides plenty of extra
clearance and the cool new look you've been yearning for.
High strength fiberglass composite construction.
The show worthy inner liner is smooth, strong and ready for prep and
paint.
This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a stock inner frame that allows it to bolt up
using all existing hardware for quick easy installation. Cool air passes
in and out of the engine compartment by way of an air-passage screen on
the rear of the hood. The black EDP coating prevents rust.
This Quality 2 in. steel cowl hood is manufactured to the highest standards and has a stock inner frame that allows it to bolt up
using all existing hardware for quick easy installation. Cool air passes
in and out of the engine compartment by way of an air-passage screen on
the rear of the hood. The black EDP coating prevents rust.
Smooth
gray gellcoat finish both inside and out. Accepts original hinge, latch & regulator hardware. Double wall posts support upper window and track. Windows come blanked in and must be opened during installation. Coremat® reinforced outer skin reduces "print thru". Original felts can be epoxied in the door post and side track. Door is supplied bare with no glass, mechanism, tracks or hardware.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. headlights anr eliminates your cowl panel providing you with a
functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit comes with basic installation hardware.
Quick
/ Full engine access has never been so easy! Manufactured as a one piece
unit with a smooth gellcoated finish. The interior is textured black
lacquer. This unit accepts the o.e.m. headlights providing you with a
functional new one piece look. Wheel openings feature a smooth 90° roll
which extends in a full ¾". This unit comes with basic installation hardware
- click photo for installation tips.
Quick
/ Full engine access has never been so easy! Manufactured as a one piece
unit with a smooth gellcoated finish. The interior is textured black
lacquer. This unit accepts the o.e.m. grill and headlights providing you
with a functional new one piece look. Wheel openings feature a smooth 90°
roll which extends in a full ¾". This unit comes with basic installation
hardware - click photo for installation tips.
Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer
inner finish. Full inner flange for easy installation. Jam holes and
attaching points must be opened for installation. smooth roll into engine
compartment. No other reproduction fiberglass wheel wells come so complete.
Sold in pairs only.
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for use with
factory latch and hinge. Side edges
fit tight along fender lines just
like your stock hood. Scoops &
baffles either come with factory
installed rear grills or door opening.
Tech-Hoods
& Good Hoods Composite design allows for curves
and ram air ports that you just can't produce in steel. The
high tech design of the inner liner provides full
support. Some models feature ducting for ram air applications, others provide
max clearance.
Perimeter Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
