On-Sale!
This
Dominator Tech-Hood hood says Stand Clear! The big 3 inch scoop provides
extra clearance, and a cool new look.
High strength fiberglass composite construction. Steel reinforcement for
added for hinging and durability.
The show worthy inner liner is smooth, strong and ready for prep and
paint.
This Stock
Design Tech-Hood hood is
ding resistant and obviously will not rust! It
features high strength
fiberglass composite construction.
The gray gellcoated show worthy inner liner is smooth, strong and ready
for prep and paint.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. markers and headlights providing you with a functional new one
piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit does not come with installation hardware - click photo for
installation tips.
Smooth
gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish.
Full inner flange for easy installation. Hood jam holes and attaching points must be opened for installation. No other reproduction fiberglass fenders come so complete.
Sold in pairs only.
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for use with
factory latch and hinge. Side edges
fit tight along fender lines just
like your stock hood. Scoops &
baffles either come with factory
installed rear grills or door opening.
Tech-Hoods
& Good Hoods Composite design allows for curves
and ram air ports that you just can't produce in steel. The
high tech design of the inner liner provides full
support. Some models feature ducting for ram air applications, others provide
max clearance.
Perimeter Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
You
can order on-line anytime 24/7, or Call our order-tech line Monday-Thursday
9am-2pm at 1-352-468-1562.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions.
See Policies
