All hoods ship from the manufacturer freight collect. For approximate charges to your area please view shipping rate chart.

47-53 Chevrolet Truck Fiberglass 3 Window Cab On-line price $6599.00  Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered with black lacquer finish.   The unit arrives bare without dash, doors or any mechanical or electrical devices. Headliner is supplied but comes separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the collecting water.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.           All safety concerns must be taken up with the chassis shop involved with the project.    Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........ We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.     Part # FCGA-47

47-53 Chevrolet Truck Fiberglass 5 Window Cab On-line price $6599.00  Smooth, easy to prep and paint, gray sandable exterior gellcoat finish. Aluminum plate reinforced firewall & door hinge areas provides the necessary strength for proper support of factory doors & hardware. Marine Grade Pressure treated floor support beams are sealed into the fiberglass and covered with black lacquer finish.   The unit arrives bare without dash, doors or any mechanical or electrical devices. Headliner is supplied but comes separately and requires professional installation. Detailed cowl vent allows for quick, easy opening. . . there is even a gutter to drain the collecting water.  Note: Factory installed floor braces may need to be trimmed or removed for desired fit.  Cabs - although strong, straight, rust free & reliable - are not the project for the average "Joe". They are intended for the serious "Ground Up Builder" who has the time, money & experience to do the job correctly.           All safety concerns must be taken up with the chassis shop involved with the project.    Once finished these cabs look exceptional and should just about last forever, however, sit down and Please give some serious thought before ordering........ We prefer that our customers be confident & educated in the amount of work required to complete this project and secure in the choice that you make.     Part # FCGA-48

47-53 Chevrolet Truck Fiberglass Dash Blank On-line price $299.00  Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full inner flange for easy installation. Jam holes and attaching points must be opened for installation.     Part # FCGS-53

47-54 Chevrolet Truck Fiberglass Doors - Pair On-line price $878.00  Smooth gray gellcoat finish both inside and out. Accepts original hinge, latch & regulator hardware. Double wall posts support upper window and track. Windows come blanked in and must be opened during installation. Coremat® reinforced outer skin reduces "print thru". Original felts can be epoxied in the door post and side track. Door is supplied bare with no glass, mechanism, tracks or hardware.    Part # FCGD-47

47-53 Chevrolet Truck Fiberglass Tilt Front End On-line price $1899.00  Quick / Full engine access has never been so easy! Manufactured as a one piece unit with a smooth gellcoated finish. The interior is textured black lacquer. This unit accepts the o.e.m. grill and headlights providing you with a functional new one piece look. Wheel openings feature a smooth 90° roll which extends in a full ¾". This unit comes with basic installation hardware - click photo for installation tips.    Part # FCGI-47

47-54 Chevrolet Truck Fiberglass Short Wheel Base Running Boards - Smooth On-line price $249.00  Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full rear flange for easy installation. Attaching points must be opened for installation. Heavy under reinforcement may need trimed for installation. No other reproduction fiberglass running boards come so complete. Sold in pairs only.   Part # FCGZ-54

47-53 Chevrolet Truck Fiberglass Stepside Fenders - Pair On-line price $778.00  Wheel openings feature a smooth 90° roll which extends in a full ¾". Smooth gray gellcoat exterior finish. Fiberglass texture, black lacquer inner finish. Full inner back flange for easy installation. Rear jam holes and attaching points must be opened for installation. No other reproduction fiberglass fenders come so complete. Sold in pairs only.   Part # FCGF-48

47-53 Chevrolet Truck Fiberglass Stepside Bed Long Wheel Base On-line price $3999.00  Ideal for customized applications. Double panel side walls, with a smooth gray gellcoat inner and outer finish. Hollow sealed stake pocket - can be opened if desired for original appearance. Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed.  Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed Wood Kits. Side flange is angled and does not have the curled design of the original bed (Due to compound curve & fiberglass mold limitations.)   Part # FCGB-54L

47-53 Chevrolet Truck Fiberglass Stepside Bed Short Wheel Base On-line price $3999.00  Ideal for customized applications. Double panel side walls, with a smooth gray gellcoat inner and outer finish. Hollow sealed stake pocket - can be opened if desired for original appearance. Design for use and abuse with heavy Marine Grade PT under floor reinforcements - which can support the same weight load as the original bed.  Gellcoated Fiberglass floors - recessed 3/4" to allow for the installation of "Aftermarket" Bed Wood Kits. Side flange is angled and does not have the curled design of the original bed (Due to compound curve & fiberglass mold limitations.)   Part # FCGB-54S

Hood Scoops and Accessories   Design and build your own custom hoods. Steel and fiberglass scoops are now available in a variety of styles. Reproduction 70's style pin kits have also just arrived, 30 piece kit w/ gaskets and trim.