This Dual Ram Air Tech-Hood has 2 very high volume ram air ports
up front. It's rear cowl area can be opened for flow through cooling. The inner
liner insulates the outer surface and is smooth, strong and ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
This Deep Throat Tech-Hoods high volume ram air port
actually dips below the hood surface for an extremely aggressive look. It's rear cowl
area can be opened cooling. The smooth inner is ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
This
CHILLER Tech-Hood hood easily installs to factory hood hinges. It's air
extractor area removes a very high volume of hot compartment air. The smooth inner insulates the outer surface
from engine heat and is ready for
prep and paint. Easy to install with factory hardware. Made in the USA.
On-Sale!
This GT-500 Tech-Hood mimics the famous
68 Shelby Mustang and provides plenty of additional clearance and fresh ram air. The inner
liner insulates the outer surface and is ready for
prep and paint. High strength composite construction. Easy to install with factory hardware. Made in the USA.
This
Good Hood says More Power! Big scoops for curb appeal.
Made of high strength fiberglass composite
construction. Steel reinforcement is added for durability.
An optional dyno-proven
functional ram air upgrade
is available. The show
worthy inner liner is smooth, strong and ready for prep and paint.
This TALL
Good Hood says More Power! Big scoops for curb appeal.
Made of high strength fiberglass composite
construction. Steel reinforcement is added for durability.
An optional dyno-proven
functional ram air upgrade
is available. The show
worthy inner liner is smooth, strong and ready for prep and paint.
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for use with
factory latch and hinge. Side edges
fit tight along fender lines just
like your stock hood. Scoops &
baffles either come with factory
installed rear grills or door opening.
Tech-Hoods
& Good Hoods Composite design allows for curves
and ram air ports that you just can't produce in steel. The
high tech design of the inner liner provides full
support. Some models feature ducting for ram air applications, others provide
max clearance.
Perimeter Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
You
can order on-line anytime 24/7, or Call our order-tech line Monday-Thursday
9am-2pm at 1-352-468-1562.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions.
See Policies
