This composite reproduction stock design hood features: 90 degree edges on both sides to help maintain fender contours, High performance light weight design, Full perimeter inner frame utilizes OEM hinge & latch, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.
Styled after the original Z-28 design, Full open inner chamber provides + - 1" of additional clearance, Perimeter inner frame utilizes OEM hinge & latch, 90 degree edges on both sides help to maintain fender contours, Black lacquered fiberglass textured inner finish, Coremat reinforced top surface.
Quick / Full engine access
has never been so easy! Manufactured as a one piece unit with a smooth
gellcoated finish. The interior is textured black lacquer. This unit accepts
the o.e.m. grill and headlights providing you with a functional new one piece
look. Wheel openings feature a smooth 90° roll which extends in a full ¾".
This unit does not come with installation hardware - click photo for
installation tips.
Manufactured as a one
piece unit with a smooth gellcoated finish. The interior is textured black
lacquer. This unit accepts the o.e.m. grill and headlights providing you with a
functional new one piece surround look. Wheel openings feature a smooth 90°
roll which extends in a full ¾". This unit comes with out
installation hardware - click photo for installation tips.
The
inner liner insulates the outer surface and is smooth, strong and ready for
prep and paint. High strength composite construction. Easy to install with
minor modifications and factory hardware. Life time rust through guarantee.
Made in the USA.
Design and build your own
custom hoods. Steel and fiberglass scoops are now available in a
variety of styles. Reproduction 70's style pin kits have also
just arrived, 30 piece kit w/ gaskets and trim.
Quality Steel Hoods Die formed steel construction allows for
use with factory latch and hinge. Side edges fit tight along fender lines just
like your stock hood. Scoops & baffles either come with factory installed rear
grills or door opening.
Tech-Hoods
& Good Hoods Composite
design allows for curves and ram air ports that you just can't produce in steel.
The high tech design of the inner liner provides full support. Some models
feature ducting for ram air applications, others provide max clearance.
Perimeter
Style Hoods
Designed for both performance and durability.
These hoods feature a smooth gellcoated, easy to sand top surface. The underside
features a light-weight perimeter inner structure allowing for full clearance
and has a fiberglass textured black lacquer finish.
You
can order on-line anytime 24/7, or Call our order-tech line Monday-Thursday
9am-2pm at 1-352-468-1562.
Copyright
1987-date
Carhoods.com, USBodySource.com.
Hard to navigate? Best if viewed in
Microsoft Explorer
Copyright. The use of names and headings is
for the sole purpose of identification.
This site, Carhoods.com, E-BodyParts.com, USBodySource.com
etc. are
not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer. The text and images in this site may not be reproduced for commercial
purposes without express written permission from US Body Source inc. 9009
South East C.R. 325 Hampton Florida 32044. All products listed herein are distributed F.O.B. from
facilities located in the USA. Please Note: Freight charges
are nonrefundable, no exceptions. Refused shipments will be charged freight in both
directions.
See Policies
